Ceramic heater
A ceramic heater as a consumer product is a space heater that generates heat using a heating element of ceramic with a positive temperature coefficient (PTC).[1][2][failed verification] Ceramic heaters are usually portable and typically used for heating a room or small office, and are of similar utility to metal-element fan heaters.
Heating principle
PTC ceramic material is semi-conductive and when voltage is applied to it, the power decreases quickly as it reaches a certain temperature according to the particular composition of the ceramic. The ceramic elements are in contact with aluminium fins, thereby heating the fins. A fan blows air across the fins, cooling the fins as they heat the air.[1]
Differences from other electric heaters
Electric heating elements made of resistance wire also have a positive temperature coefficient of resistivity, but do not increase their resistance enough to be self-regulating; they are typically used with the wires red-hot. The ceramic, on the other hand, increases its resistance sharply at the Curie temperatures of the crystalline components, typically 120 degrees Celsius, and remains below 200 degrees Celsius, providing a significant safety advantage. Ceramic heaters also have thermostats which switch power to the PTC array on and off in response to the temperature of the room, like other types of heater.[3]
History
Heater vendors first offered ceramic heaters in 1986. By 1989, approximately twenty percent of portable household heaters sold in the USA were ceramic heaters.[4][5]
Heating elements
Ceramic fin is one type of heating element used in heaters. These units contain a solid block of ceramic material with metal fins attached. An electric current heats the block, which in turn heats the fins. The fins then heat the air. In another type of heating element, the honeycomb disk, the block of ceramic is perforated with numerous holes. The air is heated as it flows through the holes. No fins are required for honeycomb disk heating elements.[6]
Criticism
In the 1980s, some manufacturers were making advertising claims that critics such as New York Times writer Matthew L. Wald found dubious. In particular, manufacturers claimed ceramic heaters produced more heat than conventional ones, even when both were rated with the same heat output.[7]
Consumers Union has not found significant differences between ceramic and conventional heaters. However, in its 1989 review, the testing organization did treat ceramic heaters as a separate category, as a response to manufacturer claims. The only significant difference it found was ceramic heaters were substantially more expensive. As a category, the conventional heaters it tested that year slightly outperformed ceramic heaters in the areas of evenly heating all parts of a room and at holding the room at a steady temperature. Consumers Union did find ceramic heaters' characteristic of sharply reducing heat output when airflow was blocked to be a useful safety feature. However, it found that the tip-over switches and overheat-protection sensors included in many conventional heaters also provided good safety.[4]
References
- ^ a b Wang, Xia; Zhang, Luyan; Chen, Gang (1 November 2011). "Hot embossing and thermal bonding of poly(methyl methacrylate) microfluidic chips using positive temperature coefficient ceramic heater". Analytical and Bioanalytical Chemistry. 401 (8): 2657–2665. doi:10.1007/s00216-011-5377-5. ISSN 1618-2650. PMID 21922306. S2CID 8371001.
- ^ Journal of the Ceramic Society of Japan. Fuji Marketing Research Company. 1992.
- ^ US patent 4703153
- ^ a b "Electric heaters: A spot of low-cost warmth". Consumer Reports. 54 (11). Consumers Union of the U.S.: 724 November 1989.
- ^ Wald, Matthew (6 January 1990). "CONSUMER'S WORLD; Weighing The Differences Among Heaters". The New York Times. Retrieved 11 January 2023.
- ^ "Helpful Information". Pelonis USA. 1998. Archived from the original on 5 December 1998.
- ^ Wald, Mattew L. (6 January 1990). "CONSUMER'S WORLD; Weighing The Differences Among Heaters". The New York Times. ISSN 0362-4331.
- v
- t
- e
concepts
- Air changes per hour
- Bake-out
- Building envelope
- Convection
- Dilution
- Domestic energy consumption
- Enthalpy
- Fluid dynamics
- Gas compressor
- Heat pump and refrigeration cycle
- Heat transfer
- Humidity
- Infiltration
- Latent heat
- Noise control
- Outgassing
- Particulates
- Psychrometrics
- Sensible heat
- Stack effect
- Thermal comfort
- Thermal destratification
- Thermal mass
- Thermodynamics
- Vapour pressure of water
- Absorption refrigerator
- Air barrier
- Air conditioning
- Antifreeze
- Automobile air conditioning
- Autonomous building
- Building insulation materials
- Central heating
- Central solar heating
- Chilled beam
- Chilled water
- Constant air volume (CAV)
- Coolant
- Cross ventilation
- Dedicated outdoor air system (DOAS)
- Deep water source cooling
- Demand controlled ventilation (DCV)
- Displacement ventilation
- District cooling
- District heating
- Electric heating
- Energy recovery ventilation (ERV)
- Firestop
- Forced-air
- Forced-air gas
- Free cooling
- Heat recovery ventilation (HRV)
- Hybrid heat
- Hydronics
- Ice storage air conditioning
- Kitchen ventilation
- Mixed-mode ventilation
- Microgeneration
- Passive cooling
- Passive daytime radiative cooling
- Passive house
- Passive ventilation
- Radiant heating and cooling
- Radiant cooling
- Radiant heating
- Radon mitigation
- Refrigeration
- Renewable heat
- Room air distribution
- Solar air heat
- Solar combisystem
- Solar cooling
- Solar heating
- Thermal insulation
- Thermosiphon
- Underfloor air distribution
- Underfloor heating
- Vapor barrier
- Vapor-compression refrigeration (VCRS)
- Variable air volume (VAV)
- Variable refrigerant flow (VRF)
- Ventilation
- Water heat recycling
- Air conditioner inverter
- Air door
- Air filter
- Air handler
- Air ionizer
- Air-mixing plenum
- Air purifier
- Air source heat pump
- Attic fan
- Automatic balancing valve
- Back boiler
- Barrier pipe
- Blast damper
- Boiler
- Centrifugal fan
- Ceramic heater
- Chiller
- Condensate pump
- Condenser
- Condensing boiler
- Convection heater
- Compressor
- Cooling tower
- Damper
- Dehumidifier
- Duct
- EcoCute (Japan)
- Economizer
- Electrostatic precipitator
- Evaporative cooler
- Evaporator
- Exhaust hood
- Expansion tank
- Fan
- Fan coil unit
- Fan filter unit
- Fan heater
- Fire damper
- Fireplace
- Fireplace insert
- Freeze stat
- Flue
- Freon
- Fume hood
- Furnace
- Gas compressor
- Gas heater
- Gasoline heater
- Grease duct
- Grille
- Ground-coupled heat exchanger
- Ground source heat pump
- Heat exchanger
- Heat pipe
- Heat pump
- Heating film
- Heating system
- HEPA
- High efficiency glandless circulating pump
- High-pressure cut-off switch
- Humidifier
- Infrared heater
- Inverter compressor
- Kerosene heater
- Louver
- Mechanical room
- Oil heater
- Packaged terminal air conditioner
- Plenum space
- Pressurisation ductwork
- Process duct work
- Radiator
- Radiator reflector
- Recuperator
- Refrigerant
- Register
- Reversing valve
- Run-around coil
- Sail switch
- Scroll compressor
- Solar chimney
- Solar-assisted heat pump
- Space heater
- Smoke canopy
- Smoke damper
- Smoke exhaust ductwork
- Thermal expansion valve
- Thermal wheel
- Thermostatic radiator valve
- Trickle vent
- Trombe wall
- TurboSwing
- Turning vanes
- Ultra-low particulate air (ULPA)
- Whole-house fan
- Windcatcher
- Wood-burning stove
- Zone valve
and control
- Air flow meter
- Aquastat
- BACnet
- Blower door
- Building automation
- Carbon dioxide sensor
- Clean air delivery rate (CADR)
- Control valve
- Gas detector
- Home energy monitor
- Humidistat
- HVAC control system
- Infrared thermometer
- Intelligent buildings
- LonWorks
- Minimum efficiency reporting value (MERV)
- Normal temperature and pressure (NTP)
- OpenTherm
- Programmable communicating thermostat
- Programmable thermostat
- Psychrometrics
- Room temperature
- Smart thermostat
- Standard temperature and pressure (STP)
- Thermographic camera
- Thermostat
- Thermostatic radiator valve
trades,
and services
- Architectural acoustics
- Architectural engineering
- Architectural technologist
- Building services engineering
- Building information modeling (BIM)
- Deep energy retrofit
- Duct cleaning
- Duct leakage testing
- Environmental engineering
- Hydronic balancing
- Kitchen exhaust cleaning
- Mechanical engineering
- Mechanical, electrical, and plumbing
- Mold growth, assessment, and remediation
- Refrigerant reclamation
- Testing, adjusting, balancing
organizations
- Indoor air quality (IAQ)
- Passive smoking
- Sick building syndrome (SBS)
- Volatile organic compound (VOC)
- ASHRAE Handbook
- Building science
- Fireproofing
- Glossary of HVAC terms
- Warm Spaces
- World Refrigeration Day
- Template:Home automation
- Template:Solar energy